Morbi et tellus imperdiet, aliquam nulla sed, dapibus erat. Aenean dapibus sem non purus venenatis vulputate. Donec accumsan eleifend blandit. Nullam auctor ligula

Get In Touch

Quick Email
[email protected]
  • Home |
  • How to build a double chainlink driveway gate

How to build a double chainlink driveway gate

How to Build a Double Chainlink Driveway Gate: The Ultimate Guide

Building a double chainlink driveway gate can seem like a daunting task, but with the right guidance and instructions, it becomes an achievable project. This review will highlight the positive aspects and benefits of learning how to build a double chainlink driveway gate, along with the conditions in which it can be used effectively.

Positive Aspects of "How to Build a Double Chainlink Driveway Gate":

  1. Comprehensive Step-by-Step Instructions:
  • The guide offers detailed step-by-step instructions, making it easy for beginners to follow along.
  • Each step is explained clearly, ensuring that even those with limited experience can successfully complete the project.
  1. Visual Aids and Diagrams:
  • The guide includes visual aids and diagrams that visually illustrate the construction process, making it even easier to understand.
  • These visuals help users visualize the gate's design and ensure that they are on the right track during each stage of construction.
  1. Cost-Effective Solution:
  • Building your own double chainlink driveway gate can be a cost-effective alternative to purchasing a pre-made gate or hiring professionals for installation.
  • By following the guide, users can save money while still achieving a high-quality gate that meets their
Most chain link posts can be installed by actually pouring the cement in the hole first and then 'sticking' the post in the wet cement. Simply push the post into the cement mix in the center of the hole. Set terminal posts as tight to the string as possible without touching the string.

How much gap between gate and post chain link?

Distance between gate posts is determined by adding the actual width of the gate to an allowance for hinges and latches. Single walk gates require 3¾" for hinges and latches and double drive gates require 5½".

How do you tension a chain link fence gate?

And we're not going to cut the wire until we have it on the gate. But you want to go ahead and slide two of these clamps.

How do you fix a gap under a chain link gate?

The good thing about chain link fences is that it is easy to fix this problem. All you need to do is slightly dig underneath the gate further and place chicken wire in the area, almost creating a speedbump. Then, refill the area with dirt to keep the wire in place.

Do you cement every post on a chain link fence?

You can install a chain link fence without using concrete, but it is not recommended. Anchoring each fence post in concrete is the best way to ensure your fence will stand straight and tall for many years.

Can you add a gate to an existing chain link fence?

This is fairly simple to do, because only one terminal post needs to be added. A standard sized gate can usually be used because the new post can be placed to make the gate fit. First disconnect the bolts and bands from the chain link that is stretched to the terminal post where you want the new gate to be placed.

How do you hang a chain link gate?

Attach the Gate

  1. Attach the gate hinges to the posts about 8 inches from the top and bottom.
  2. Loosely attach the frame hinges to the gate.
  3. Use blocks on the ground to set the gate about 2 inches above ground.
  4. Attach the latch at a comfortable height on the gate and secure with nuts and bolts.

Frequently Asked Questions

How do you attach a chain link to a post?

And don't skip on those wire ties and clips they prevent pets from pushing out the bottom of the fence.

Can you put a gate on at post?

Easily hang gates from metal T-posts. Hang and hold any farm or garden gate with 5/8” or 3/4" hinge eyes from a standard Metal T-post.

How do you secure a chain link fence to a post?

Attach Tension Bar to Post

Stand the mesh up. Slide the tension bar between the opening on the tension bands. Run a bolt through each tension band to lock the tension bar in place. Use a socket wrench to bolt the tension bar into the tension bands on one of the end posts.

How do you secure a double metal gate?

The most common (and arguably the easiest) way to lock a double gate is to use a chain and padlock. Simply wrap the chain around both gate frames of the double gate and secure them with the padlock as seen in the below picture. Now, this is a cost-effective way to secure a double gate.


How wide should a double gate be?
Driveway gate sizes

Regarding driveway gates, they have standard sizes ranging from 12-16 ft (3.66-4.88 m) wide for single driveway gates and 24-32 ft (7.32-9.75 m) for double driveway gates. Heights typically vary between 6 and 8 ft (1.83 and 2.44 m).

Can you attach a chain link gate to wooden post?
The wood post hinge allows you to attach a chain link fence gate to a wood fence post. The hinge pin is threaded for easy installation on wood post. The hinge pin features a galvanized coating to prevent rusting and withstand the elements.
How do you secure a chain link to a wooden post?
Slide a tension bar through the end of the fabric and attach it to the terminal bands on the end post using carriage bolts and nuts. Pull the fabric tight and attach it to the next post using tension bands and bolts/nuts.
How do you install a gate on a wooden post?
Place the posts either side with their tops 50mm higher than the top of the gate and leave a 5mm gap either side of the gate so it can open and close freely. Use two timber lengths to raise the gate slightly, so it sits in line with the gateposts. You can adjust this as necessary with timber off-cuts or wedges.

How to build a double chainlink driveway gate

How do you attach a metal gate to a T post? Over it slide the top gate hinge pin down put it in the eye of the gate. Just under a knob this is for livestock.
How to build a chain link driveway gate?
  1. Assemble the Gate Frame. To assemble a chain-link gate, start by assembling the frame by sliding all pieces of tubing together.
  2. Position Tension Bar.
  3. Attach Tension Bar.
  4. Attach Second Tension Bar.
  5. Tie Mesh.
  6. Hang Hinge Straps.
  7. Hang the Hinges.
  8. Hang the Chain-Link Gate.
How can I make my chain link gate more secure? Here is our list of the most important things you can do to beef up the security of your chain link fence installation:

  1. Know Your Gauge.
  2. Choose the Right Selvage.
  3. Consider a Bottom Rail...
  4. 4. ...Or Buried Mesh.
  5. A Secure Structure.
  6. Closer Posts.
  7. Steel Fittings.
  8. Barbed Wire and Razor Coils.
  • What is the alternative to a chain link gate?
    • Consider bamboo, wood panels, or vinyl. These options are cheaper than chain-link but still offer good durability and style. In this article, we'll explore budget-friendly options that save money and meet your fencing needs.
  • How big is an opening for a chain link gate?

      Standard opening widths: Single Swing – 36", 39", 42" and 48" Double Swing – 10 ft.

  • How do you make a chain link gate look nice?
    • 9 Ways to Make a Chain Link Fence Look Better
      1. Privacy Slats. Privacy slats offer a dual-purpose solution for enhancing the visual appeal and seclusion of your chain link fence.
      2. Vines and Climbing Plants.
      3. Fence Paint​​
      4. String Lights.
      5. Planter Boxes.
      6. Artificial Greenery Panels​​
      7. Mesh Banners or Flags.
      8. Privacy Screen or Fabric.